MCS, Brake Fluid DOT 5 Silicone. 1 liter

MCS, Brake Fluid DOT 5 Silicone. 1 liter
Varenr.
HD904509
Lager
På lager
Pris
kr 450,00

Kvantumsrabatt

Loading...
H-D opp til 2005

1 liter bottle. Silicon based. Non agressive for painted surfaces, plastics. DOT 5 is non-hygroscopic and will therefore not absorb water. Not compatible with anti-lock brakes. Note: Do not mix with DOT 3 & 4 brake fluids. Tech tip: If you want to use DOT 5 may be easier to decide if it's right for you with some added knowledge about this type of brake fluid. DOT 5 silicone is non-aggressive for painted surfaces, plastics and has anti-corrosive characteristics, is non-hygroscopic and will therefore not absorb water. Great characteristics for vehicles that are not used much. However, when water accumulates in the brake system over time, and it is not absorbed by the brake fluid, in theory it could create pockets of water which could boil in extreme circumstances. This could result in vapor lock and total brake failure. Since DOT 5 silicone does not absorb water the accumulated water may not fully be removed from the brake system when the brake fluid is changed. DOT 5 silicone may never be mixed with DOT 3 or 4 brake fluids. It is also not compatible with ABS (Anti-lock Brake System) or ASR (Anti Slip Regulation) since it will foam easier.

Note that The Factory has used DOT 5 up to around 2006, about the time when ABS was introduced...

Passer til følgende modeller:

Up to 2005 Softail, Dyna, V-Rod, up to 2004 FLT/Touring, up to 2006 XL

MotorcycleStorehouse

Din nettleser er utdatert!

For å kunne bruke alle funksjoner på nettsiden må du oppdatere nettleseren. Oppdater min nettleser nå

×