J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550?F when fully cured.
(2) 1 oz. (28.4g) Tubes
Great For:
- Household Repairs
- Automotive
- Plumbing
- Marine
- Crafts & More
Use On:
- Automotive
- Brick
- Concrete
- Epoxy & Adhesives
- Fiberglass
- Metal
- And More
Instructions
Prepare:
Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
Mix:
Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
Apply:
Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
Dry:
Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.
| Strength |
3960 PSI |
| Set Time |
4-6 Hours |
| Cure Time |
15-24 Hours |
| Cure Color |
Dark Grey |
